Ошибки блока управления дорожками 3Qt

3QT Error List
The following errors are all displayed on monitors during the start-up test except for Runtime Errors, which are displayed when game is in progress.

CPU Internal Error:

Error 160 VTNT not initialize (1)

Error 161 VTNT not initialize (1)

Error 162 VTNT not initialize (1)

Error 163 Safe program loaded in memory (1)

Error 65535 Missing file in the CPU internal memory (1)

XCOM Devices

Error 190 No communication with the Xcom Device (2)

Error 191 Xcom Device program check Fail (2)

Error 192 Xcom Device program check Fail (2)

Error 193 Xcom Device program check Fail (2)

Error 194 Xcom Device program check Fail (2)

Error 195 Xcom Device program check Fail (2)

Error 196 Xcom Device program check Fail (2)

Error 197 Xcom Device program check Fail (2)

Error 198 Xcom Device program check Fail (2)

Error 199 Xcom Device not found (2)

Test TV Error Number:

Error 200 No communication with TVision (2)

Error 200/1 Unexpected communication character (2)

Error 200/2 Wrong character communicating with Tvision (2)

Error 200/3 TVision seems okay (2)

Error 200/4 Six seems okay (2)

Error 200/5 Six communication fail (2)

Error 201 Wrong char on Tele.Bin file (1) Error 202 TVision communication failure (4)

Error 203 Camera Fail Check. If there is a camera on each lane, the problem is with the camera of the Left lane (3)

Error 204 Check Camera Lane Right Fail (3)

Error 205 TVision communication failure (4)

Error 206 Wrong header on Tele.Bin file (1)

Error 208 Impossible to communicate with F-Box (5)

Error 209 Old F- Box version (Version 1.0) (6)

Error 210 T-Vision hardware not compatible (7)

Error 211 Fbox strike time not valid

Runtime error:

Error 900 Internal Error (2)

Error 901 NexOS Version Error (2)

Error 902 Internal Error on score initialize (2)

Error 903 Internal Error (2)

Error 904 Internal Error on video initialize (2)

Error 905 Internal Error on score initialize (2)

(1) Upload program to the lanes with ERASE MEMORY enabled.

(2) Restart the 3QT manually

(3) The TVision / Q-Vision board is not able to work with the camera. The problem is usually in the wiring between the board and the Camera.

(4) Unusual kind of problem; retry by switching the 3QT off and on again.

(5) The lane configuration needs an F-Box (Enhanced pinsetter interface) but it is impossible to communicate with it.

(6) The microprocessor on the F-Box is an old version, and the lane cannot be configured to handle the strike signal.

(7) Internal errors should be made known to QubicaAMF. To restart the program switch the 3QT off and on again.